Antenna MOD for Belkin Tunecast II FM Transmitter
First, open the battery compartment in back and remove the screw
It snaps together, so once the screw is removed, don't be shy:: go ahead and
pull it apart.
Now remove the screw from the board
You now have THIS!
Notice the blue wire in the bundle from the speaker line connector.
I used the hole that the cable looped back to to use as an exit point for the
new antenna wire.
Snap the top case back on, being careful that all wires are in their proper
place, and replace the screw behind the batteries.
|© 2009 Christmasdisplays.net|